Description: Fuel/Water Separator Spin-on with Drain and Sensor Port
Thread: M16 x 1.5
OD:- 3 11/16 (93.7)
Length: 7 31/32 (202.4)
O-ring:[1] Included
Igskt: G401
Notes: CAUTION: Furnished O-Ring must be installed on post for seal. Remove rubber paint plug before installation.
Contains: Sensor Port Thread: M10 x 1.5
Weight KGS: 0.633
Volume m3: 0.002
Case Qty: 12
Upc: 7 91440 07903 8
Fits: CASE 721D, 721DXT Wheel Loaders w/Iveco 6TAA6804 (6.8L) Eng., 1850K w/6.7L Eng., CASE-INTERNATIONAL MXU125, MXU135 w/6.7L Eng., Maxxum 110 w/4.5L Eng., Maxxum 115 w/6.75L Eng., Maxxum 120 w/6.75L Eng., Maxxum 125 w/6.75L Eng., Maxxum 130 w/4.5L Turbo Eng., Maxxum 140 w/6.75L Eng., Puma 115 w/6.7L Eng., Puma 125 w/6.7L Eng., Puma 140 w/6.7L Eng., Puma 155 w/6.7L Eng., Puma 165 CVT w/6.7L Turbo Eng. (11/08-on), Puma 165 w/6.7L Turbo Eng. (1/07-1/09), Puma 165 w/6.7L Turbo Eng. (1/09-on), Puma 180 CVT w/6.7L Turbo Eng. (11/08-on), Puma 180 w/6.7L Turbo Eng. (1/07-1/09), Puma 180 w/6.7L Turbo Eng. (1/09-on), Puma 195 CVT w/6.7L Turbo Eng. (11/08-on), Puma 195 w/6.7L Turbo Eng. (1/07-1/09), Puma 195 w/6.7L Turbo Eng. (1/09-on), Puma 210 CVT w/6.7L Turbo Eng. (11/08-on), Puma 210 w/6.7L Turbo Eng. (1/07-1/09), Puma 210 w/6.7L Turbo Eng. (1/09-on), Puma 225 CVT w/6.7L Turbo Eng. (11/08-on), MXU110 w/4.5L Turbo Eng.
Replaces: Case 87803182; Cummins 2830359; Fleetguard FS19772
By buying this product you can collect up to 1
loyalty point.
Your cart will total 1
point that can be converted into a voucher of
£0.50.
