 |
Categories
- Filters
- Filter Service Kits
- Consumables
- Oils & Lubricants
-
Racor
- Alternative fuel
- Crankcase Filtration
- Engine Air
- Hydrocarbon Filtration
- Lubrication Filtration
- Marine Fuel Filtration
-
Mobile Fuel Filtration
- Engine Spin-On
- Fuel Filter Trolleys
- Mobile Fuel Accessoris
- Fuel Parfit Products
- P series Fuel Water Seperators
- PS120 Strainer Pre Filters
- Turbine Series filter assemblies
- 025-MBL-02B Series
- 045-RAC-351 Series
- 100 Series
- 200 Series
- 300 Series
- 300RC Series
- 400 Series
- 424 Series
- 500 Series
- 600 Series
- 700 series
- Racor Filter Trolleys
- Sentinel Systems
- Village Marine
- Hitachi Filters
RAC SeriesThere are no products.
Design Features
API & API/IP filter water separators are fitted with coalescer elements and separators which are required in jet fuel supply and delivery systems. These include fixed fueling installations, pipe lines and tank farms as well as aircraft refueling vehicles, hydrant dispensers and other mobile fueling equipment. Racor API & API/IP coalescers and separators are also commonly used in other hydrocarbon fuel streams where high efficiency filtration and water separation are required.
Technical Details
Tested and qualified to API/IP 1581, 5th Edition, Category C, Type S specifications and API 1581, 3rd Edition, Group II, Class B & C
Nominal Filtration: 1 micron
Changeout Differential Pressure: 15 psid
Minimum Burst Pressure: 75 psid
Recommended Service Time: 24 months1
Recommended Storage Time: 36 months1
Operating Temperature: 176oF (max)
Flow Direction: inside to outside
Outside Diameter: 6 inch
Metal parts in epoxy coated steel
Seals in NBR (Buna-N)
Thread based endcaps made out of Polyamide
Labeling according to API/IP (date of manufacture, ID Number, etc.) on the endcap.
1Manufacturer recommendations.
2Original packaging, 68oF and max. 50% humidity after date of shipment out of manufacturers stock.
API & API/IP filter water separators are fitted with coalescer elements and separators which are required in jet fuel supply and delivery systems. These include fixed fueling installations, pipe lines and tank farms as well as aircraft refueling vehicles, hydrant dispensers and other mobile fueling equipment. Racor API & API/IP coalescers and separators are also commonly used in other hydrocarbon fuel streams where high efficiency filtration and water separation are required.
Technical Details
Tested and qualified to API/IP 1581, 5th Edition, Category C, Type S specifications and API 1581, 3rd Edition, Group II, Class B & C
Nominal Filtration: 1 micron
Changeout Differential Pressure: 15 psid
Minimum Burst Pressure: 75 psid
Recommended Service Time: 24 months1
Recommended Storage Time: 36 months1
Operating Temperature: 176oF (max)
Flow Direction: inside to outside
Outside Diameter: 6 inch
Metal parts in epoxy coated steel
Seals in NBR (Buna-N)
Thread based endcaps made out of Polyamide
Labeling according to API/IP (date of manufacture, ID Number, etc.) on the endcap.
1Manufacturer recommendations.
2Original packaging, 68oF and max. 50% humidity after date of shipment out of manufacturers stock.
There are no products in this category.
